A hole saw is a tool that is used to drill perfect circular holes to various surfaces. Surfaces such as plastics, steel, wood, and metal. The sizes of hole saws vary according to their functions and the type of surfaces to drill. The hole saw is either circular or cylindrical, having tiny teeth in one end.
After some time, it might need to be sharpened to provide better results. If you want to find out how to sharpen a hole saw, stick with our article, where we will explore this information in detail.
Sharpening the hole saw is a challenge that requires precision. Professionals’ experience has shown that after drilling 2 or 3 holes, some hole saws become dull.
One way to know if your hole saw requires sharpening is when you apply much more effort to drill the same hole you have been drilling for lesser efforts and not seeing results.
Also, when dull, the teeth of your hole saw become slightly rounded and fail to cut through the surface, you are trying to cut.
Easy. Available. Efficient. Hand files not only provide you with the ability to sharpen hole saws, but each tooth of the hole saw can also be sharpened to your taste. Although the process can take much effort and time, diamond files are considered the best option for sharpening hole saws.
If you have access to a handheld electric grinder, then this is for you. Electric handheld grinders are slightly quicker than hand files, but they also require a lot of time and concentration.
Using a bench grinder to sharpen hole saws is another option. A bench grinder is used by attaching the hole saw to a rotatable vice. After this, angle the teeth into the grinding wheel, and you have your hole saw sharpened.
Hole saws are always subjected to a great amount of wear and tear when in use. This is due to the friction of the surfaces of the hole being drilled.
Eventually, the hole saws would have to be replaced, especially when sharpening hole saws isn’t much of an option any longer.
One advantage to this is that hole saws are detachable. Hence you don’t need to replace the whole machine. Also, there are cases where hole saws become dulled, and it is impracticable or impossible to sharpen properly. If you do not have the time and energy to sharpen your hole saw, considering hole saw replacement is a good option. The replacements are cheap, as hole saws do not cost a fortune.
The vice grip of your sharpener comes detached. You would have to secure it in its fitting. After that, take your hole saw and place it in the drill end of the vice grip.
Loosen the revolving head of the grip and place the hole saw so that the teeth are resting gently on the sharpening blade. Secure the hole saw with the screw knob to avoid movement during the process.
You are to remember where you started because you would be going in a full circle. To achieve this, you have to mark the area you want to drill a hole in so that you do not make a double revolution. Use a permanent marker to put a tiny dot or line on the hole saw at the starting point.
Fix the hole of the hose under the hole saw directly if your machine has a hose adjustment. The function of this feature is to catch metal clouds of dust flying around when sharpening.
The final step. Start the machine and place the hole saw against the blade (sharpening blade). Hold for 3 seconds and pull back. Repeat this process for each tooth until you reach the marked point.
Setting up hole saws is easy – the descriptions come in the user manual. There are different types of hole saws depending on their functions. This means that you pick a hole saw based on the kind of function you need it to perform for you.
Now that you have learned how to sharpen the hole saw, we bet you can’t wait to put your knowledge to use.
If you are interested in getting other power tools, check our other guides. Do you need a warm drive saw? Consider the Milwaukee 6477-20 model that features impressive reliability. Also, you might want to purchase a new impact driver. Follow our buying guides to get the best products available on the market!